Trusted by Businesses & Homeowners
🏢 Commercial Clients
- Retail storefronts & plazas
- Restaurants & cafés
- Offices & coworking
- Industrial & warehouses
🏠 Residential Clients
- Houses, condos & townhomes
- Patio & balcony doors
- Shower glass & mirrors
- Custom glass projects
Service Areas
Toronto & the Greater Toronto Area
Reviews
“Same-day board-up after a break-in. Crew arrived fast and were very professional.”
“They replaced our storefront glass overnight. Zero downtime for the shop.”
“Sliding door runs like new. Technician explained everything clearly.”
“Great communication and no surprises on the quote. Would recommend.”
“Patio door glass swap was quick and tidy. Left the place cleaner than before.”
“We upgraded to IGUs — noticeable difference in noise and draft.”
“Emergency call at 1am, they still picked up and secured the door.”
“Shower glass install looks amazing. Precise measurements and hardware.”
Free Quote
Tell us what happened — we’ll reply within minutes.
FAQ
Do you offer emergency service?
Yes — board-ups, break-in securing and urgent glass/door issues across Toronto & GTA.
Can you replace just the glass instead of the whole window?
Often yes — an IGU swap. If the frame is rotten/warped, full window replacement is better.
Do you install automatic doors and access control?
Yes — operators, sensors, maglocks, strikes, keypads, fobs and integration.
What areas do you cover?
Toronto (Downtown, Midtown, North York, Etobicoke, Scarborough) + GTA cities listed above.
What services do you provide and how do I start?
We repair and replace doors and glass for homes and businesses: storefronts, automatic doors, sliding systems, panic bars, seals, caulking, and access control. Send photos/video and a short note — we’ll estimate and book the earliest slot.
Do you operate 24/7 and who arrives on site?
Yes — we take emergency calls around the clock. A technician arrives with tools and common parts; if a special part is required, we make the opening safe and schedule the final install.
How fast can you arrive across Toronto & the GTA?
Same-day in most cases, depending on traffic and location. Urgent safety issues are prioritized.
How much will it cost?
We provide a ballpark from your photos and confirm on site before work starts. Invoice includes labour, materials, and warranty terms.
What brands and standards do you use?
We work with compatible hardware (e.g., CRL, Dormakaba, LCN) and follow Ontario Building Code, AODA, and CSA/ANSI safety standards.
Hinged door scrapes or won’t latch — what’s wrong?
Usually sagging or worn hinges/pivots or a mis-set closer. We adjust clearances, tighten fixings, replace hinges/closer if needed, and align the strike.
Door slams or closes too slowly.
We tune the closer valves (sweep/latch), spring force, and check mounting and seals. If the unit is worn or leaking, we replace it.
Key turns but the lock doesn’t catch.
We service the cylinder, lubricate and align the latch and strike. If the mechanism is worn, we replace to match your key format where possible.
Sliding door is heavy or jumps off the track.
Typically worn rollers/track. We replace rollers to match the profile, clean/true the track, and set stops and pressure.
Drafts and noise around sliding doors.
Usually worn brush or weatherstrips. We fit correct seals and adjust compression for a tight, quiet close.
Automatic door doesn’t trigger or behaves inconsistently.
We test power, safety and motion sensors, controller mode, and drive system. Often a clean/calibration fixes it; otherwise we repair or replace faulty components.
Automatic door opens too wide/slow.
We set controller parameters (speed/acceleration), sensor sensitivity, and safety zones to stay AODA/CSA compliant.
Can you add touchless buttons and safety sensors?
Yes — we upgrade to wave-to-open, add photo eyes and emergency modes for safe, hygienic use.
Glass cracked or a gasket popped out — what happens next?
We make the area safe, take measurements, and order tempered/laminated glass or an IGU. Temporary board-up is available until final glazing.
Condensation between IGU panes — can it be repaired?
That means seal failure. The correct fix is to replace the insulated glass unit; we can specify Low-E and energy-efficient options.
I want tinting, safety film, or storefront branding.
We supply safety/sun control films and frosted brand graphics. We’ll confirm artwork and access with building management.
What exactly is an emergency board-up?
We clear broken glass, secure the opening with plywood or a metal panel, protect locks, then measure and book the permanent replacement.
Do I need permits for temporary closing?
Private spaces usually don’t. In malls/managed sites we coordinate approvals and access requirements.
Why did our panic bar door fail inspection?
Common causes: incorrect clearances, latch/strike misalignment, worn mechanism, or missing signage. We restore function and compliance.
Can you pair access control with emergency exits?
Yes — with delayed egress or monitored hardware, implemented without violating life-safety requirements.
Water or air leaks around a door or storefront.
We replace seals, re-seat profiles, renew perimeter caulking with the right product, and check the wall interface.
How long does caulking typically last?
Around 5–10 years depending on weather, UV, and movement. We select the right sealant type for each joint.
We need keypad locks, maglocks, or strikes — can you help?
We spec the right solution for the leaf/frame and your access policy (code/card/fob/mobile), and configure fail-safe/fail-secure correctly.
Wind pushes our door open — how to stabilize it?
We add hold-opens, specify the proper closer, adjust compression, and for sliders fit upper/lower guides.
What warranty do you provide?
Workmanship and materials are warranted; exact terms depend on the parts used and site conditions and are listed on your invoice.
Do you remove debris and packaging?
Yes — site cleanup and proper disposal are included.
How should I prepare before the visit?
Clear access to the opening, notify security/reception, and appoint a site contact. In homes, keep pets away from the work area.
How long does a typical visit take?
Common repairs take 1–3 hours. Glass/automation replacements follow the agreed schedule once parts arrive.
Repair vs replacement — how do you decide?
We repair when hardware or glazing still has service life. We recommend replacement when wear is excessive or code/design requirements demand an upgrade.
How can I pay?
We accept major cards and e-transfer. Approved commercial accounts can be invoiced.
Can you provide formal quotes for insurance or property managers?
Yes — including before/after photos, parts specification, and detailed pricing.
How can I reduce heat loss through doors/storefronts?
Upgrade weatherstrips, tune the closer, replace IGUs with Low-E glass, and seal air gaps. Keep tracks and seals clean on sliders.
What maintenance should I do after service?
Quarterly: clean tracks/gaskets and check screws. Annually: a quick professional inspection extends component life.
Do you work in condos and office towers?
Yes — we coordinate elevators, loading docks, parking, and insurance requirements. After-hours work is available.
Can you attend evenings or weekends?
Yes — we offer evening/night/weekend slots by appointment.
Quick diagnostics: door won’t stay closed.
We check the closer, latch, strike alignment, and compression. Small adjustments often solve it.
Quick diagnostics: scraping/grinding sound.
Usually roller/track wear or debris. Cleaning and a roller swap restore smooth travel.
Quick diagnostics: sensor not triggering.
We clean and re-aim sensors, test controller modes, and replace faulty units if needed.
Quick diagnostics: strong draft under the door.
We fit new bottom/perimeter seals and adjust gaps for a tight seal.