Hardware fixes that restore security and smooth operation
A lock problem can actually be a misaligned strike, a loose closer, hinge sag, a worn latch, or an exit device that no longer resets cleanly. We troubleshoot the real cause and use practical, durable parts to restore secure closure, controlled access and dependable egress. If you need immediate securing after a break-in, start with Emergency Services.
Most common requests
Lock change, rekey, deadbolts, commercial locksets, panic bars, closers, hinge service, strike reinforcement, cylinders and keypad or smart-lock upgrades.
What you can expect
Clear diagnosis, clean installation, alignment checks, and guidance on whether the issue belongs in
door service,
maintenance, or a targeted hardware-only correction.
Lock Replacement / Rekey (Residential & Commercial)
Lock replacement or rekeying is one of the fastest ways to regain control after tenant turnover, lost keys, or security concerns. We help select appropriate hardware and ensure clean alignment for reliable operation.
Security
Rekey
Commercial
When to do it
- Move-in / move-out or new tenants
- Lost keys or unknown key copies
- Post break-in hardware upgrade
- Lock is worn, sticky, or unreliable
Our Process
- Confirm lock type and door prep
- Replace or rekey as appropriate
- Check strike alignment and latch
- Verify smooth locking operation
Cost factors
- Hardware grade and lock type
- Number of cylinders/doors
- Alignment corrections needed
- After-hours or urgent service timing
Deadbolt Installation / Upgrade
A properly installed deadbolt adds a strong primary locking point and can significantly improve security when paired with correct strike reinforcement. We install and upgrade deadbolts for residential and light commercial applications.
Best for
- Front doors and side entrances
- Upgrading from basic latch-only locking
- Improving security after a break-in attempt
- Landlord / property manager upgrades
Process
- Confirm door thickness and prep
- Install deadbolt and align strike
- Reinforce strike area as needed
- Test smooth throw and operation
Cost factors
- Hardware grade and door condition
- Need for strike reinforcement
- Existing hole prep and adjustments
- Number of doors
Door Handle / Lever / Knob Replacement
Loose handles, failing latches, and worn trim can cause doors to stick or fail to latch. We replace or upgrade handle sets and verify correct latch/strike alignment.
Common issues
- Handle feels loose or wobbles
- Latch doesn't retract smoothly
- Door won't latch unless pushed
- Broken privacy lock on interior doors
Process
- Confirm backset and door prep
- Install new set and latch
- Align strike and verify closure
- Check keys/operation where applicable
Cost factors
- Hardware quality and function
- Door prep and fitment adjustments
- Number of doors
- Commercial vs residential hardware
Commercial Locksets (Mortise, Cylinder)
Commercial doors often require heavier-duty locksets and cylinders. We service and replace common commercial hardware and help restore reliable access control for your business.
Common needs
- Worn mortise lock operation
- Cylinder replacement / rekey
- Latch/strike alignment problems
- Door no longer secures reliably
Process
- Identify compatible lockset/cylinder
- Replace or service components
- Align and verify latch engagement
- Test operation and closing hardware
Cost factors
- Hardware type and compatibility
- Condition of door prep/cutout
- Keying requirements
- Onsite access constraints
Panic Bar / Crash Bar Service
Panic bars must operate smoothly and release reliably. We adjust and service common panic hardware, replace worn parts where appropriate, and address related alignment issues that affect function.
Common issues
- Bar sticks or feels heavy
- Latch doesn't release consistently
- Door rubs or misaligns under load
- Hardware is loose or worn
Process
- Inspect operation and alignment
- Adjust latching and strike engagement
- Service/replace worn parts as needed
- Verify consistent release
Cost factors
- Hardware type and parts availability
- Door alignment and hinge condition
- Access and after-hours scheduling
- Additional closer/hinge service needs
Door Closer Hardware Replacement
A failing door closer can cause slamming, incomplete closing, or safety issues. We replace and adjust closers to restore controlled closing and reliable latching.
Common signs
- Door slams or swings too fast
- Door won't latch without pushing
- Oil leakage from closer body
- Arm or mounting hardware is loose
Process
- Confirm closer type and mounting
- Replace closer and hardware
- Adjust closing speed and latch
- Verify safe operation
Cost factors
- Closer grade and door size
- Mounting condition and repairs
- Adjustment and alignment needs
- Access constraints
Hinges / Pivots / Continuous Hinges Service
Hinge wear and sag can cause doors to drag, misalign, or fail to latch. We service hinges and pivots, tighten mounts, and correct alignment when possible.
Common issues
- Door drags on floor or threshold
- Gaps change along the frame
- Squeaking, binding, or loose screws
- Pivot doors feel unstable
Process
- Inspect hinge/pivot wear
- Tighten and reinforce mounting
- Adjust alignment for proper latch
- Replace worn hinges if needed
Cost factors
- Door weight and hinge type
- Reinforcement requirements
- Frame condition
- Number of doors
Strike / Latch Alignment & Reinforcement
Many "lock failures" are actually misalignment: the latch doesn't fully enter the strike, or the strike area is worn or weak. We realign, reinforce, and restore reliable engagement.
Common signs
- Door only locks when pushed hard
- Latch hits the strike edge
- Strike plate is loose or stripped
- Visible damage around the jamb
Process
- Diagnose alignment and contact points
- Adjust strike position and fitment
- Reinforce mounting where appropriate
- Verify consistent latching
Cost factors
- Extent of jamb wear or damage
- Need for reinforcement hardware
- Door alignment corrections
- Multiple doors/units
Keypad / Smart Lock Installation
Smart locks and keypad deadbolts add convenience, but only if the door alignment and strike engagement are correct. We install basic smart lock systems and verify consistent operation.
Best for
- Keyless entry for homes and rentals
- Simple access management for staff
- Replacing aging lock hardware
- Upgrades with a clean install
Process
- Confirm door prep and compatibility
- Install and align hardware
- Verify latch/strike engagement
- Basic setup and operation check
Cost factors
- Hardware complexity and fitment
- Door condition and alignment
- Additional reinforcement needs
- Number of doors
How We Assess Locks, Closers & Door Hardware
Hardware work only lasts when the root cause is identified. We inspect the device itself, how it meets the door and frame,
and whether the issue is wear, misalignment, code-related failure, or a security upgrade that should be planned properly.
What we inspect
- Locksets, cylinders, strikes, hinges, closers, and panic bars
- Latch engagement, frame anchoring, and reinforcement points
- Operator arms, hold-open devices, and access-control hardware
- Product labels and compatibility before parts are ordered
When repair or rekeying is enough
- The lock body is still sound and key control is the issue
- The closer can still be adjusted and sealed properly
- Panic bars, hinges, or strikes only need correction
- The opening is stable and the hardware is the weak link
When replacement is smarter
- Closers are leaking or panic devices are beyond adjustment
- Code, egress, or security needs changed over time
- Cheap hardware is failing under commercial traffic
- The lock or device is obsolete or incompatible
What to send for a fast review
- Photos of the full opening and the device itself
- Closer arm, panic bar, strike, or cylinder close-ups
- Any visible labels, stamps, or model numbers
- Notes on whether the issue is security, access, or egress
Commercial Access & Egress Support
This is where our hardware page becomes especially valuable. We regularly support commercial entries, school exits, restaurant fronts, plaza units, office suites, common areas, and mixed-use buildings where locksets, closers, panic bars, operators, strike reinforcement, and code-conscious egress hardware must work together as one dependable access system.
For property managers and business operators, the goal is not just to change parts. It is to keep access controlled, egress reliable, and recurring hardware failures from turning into tenant complaints, after-hours callouts, or code-related problems.
Typical commercial work
Panic bar upgrades, closer replacement, rekeying, cylinder changes, strike repair, office lock work, operator corrections, exit-device servicing, hinge and pull replacement, and safer access-control hardware for schools, restaurants, plazas, offices, mixed-use sites, and managed properties.
What clients care about
Cleaner egress, better daily control, stronger security, code-conscious exit hardware, and correctly matched parts so the same closer, panic bar, strike, cylinder, or operator issue does not come back a month later.
Residential & Commercial
Code & Egress Aware
Lock, Closer & Panic Hardware
Fast Quote-Ready Photo Review
Common Code-Conscious Hardware Issues
These are the small failures that often look minor in daily use but create security, access or egress problems when left alone.
Common issue patterns
- Panic bar not latching cleanly
- Closer slamming or not closing fully
- Strike misalignment at the lock side
- Worn cylinder or inconsistent key operation
- Exit device drag
- Hinge sag affecting latch or egress
When to route elsewhere
If the problem is really frame distortion, slab movement, repeated door drag or break-in damage, we may route the job into Door Services, Maintenance Services or Emergency Services so the full opening is corrected instead of only changing parts.
Popular Hardware & Locksmith Service Areas
Rekeying, closers, panic bars, cylinders, operators and strike-side corrections are frequent calls across these Toronto & GTA areas. Wider coverage is available on our service areas page.
Hardware & Locksmith FAQ
Do you service panic bars and exit devices for commercial buildings?
Yes. We repair, replace and align panic bars, exit devices and related hardware for commercial buildings, schools, restaurants, offices and managed properties.
Can a closer or hinge problem feel like a lock problem?
Yes. A closer, hinge or strike issue often shows up as hard latching, dragging or inconsistent key operation because the door is no longer landing correctly.
Can you replace hardware without replacing the full door?
Often yes. If the slab and frame are still sound, we can usually replace or correct the hardware only and restore secure operation.
Do you help landlords and property managers after tenant turnover?
Yes. We handle turnover rekeying, lock changes, closer issues, panic hardware, strike repairs and other common access corrections for managed properties.
Do you rekey business locks?
Yes. We can rekey cylinders and set up master-keyed or simplified access where appropriate for commercial entries.
Do you install smart locks and keypads?
Yes. We install residential and light-commercial smart locks or keypads where the opening and use case support them.
What photos help you confirm the right hardware faster?
A full photo of the opening, close-ups of the closer, panic bar, strike, cylinder or failed hardware, and any visible model labels help us route the job correctly.
Do you serve my city?
We serve Toronto and the GTA. You can confirm coverage on our
Service Areas page.
Recent Hardware Projects
Examples of lock installations, rekeying, and closer replacements across Toronto & the GTA.
Need locksmith or hardware services?
Call us for immediate assistance or request a quote below. Sharing a photo of your current lock or door closer helps us provide an accurate estimate.
